Comtrol eCos - Manual (Page 151)

fis list
Name
fis list — List Flash Image System directory
Synopsis
fis list [ -f ]
Arguments
Name Type Description Default
-c Show image checksum
instead of memory address
(column
Mem addr is
replaced by Checksum ).
-d Show image data length
instead of amount of flash
occupied by image
(column
Length is
replaced by Datalen ).
Description
This command lists the images currently available in the FIS. Certain images used by RedBoot have fixed names
and have reserved slots in the FIS (these can be seen after using the fis init command). Other images can be
manipulated by the user.
Note: The images are listed in the order they appear in the FIS directory, not by name or creation time.
Examples
List the FIS directory.
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0x00000000 0x00000000 0x00020000 0x00000000
RedBoot config 0x0007F000 0x0007F000 0x00001000 0x00000000
FIS directory 0x00070000 0x00070000 0x0000F000 0x00000000
47