Comtrol eCos - Manual (Page 129)

dump
Name
dump — Display memory.
Synopsis
dump {-b location } [-l length ] [-s] [-1 | -2 | -4]
Arguments
Name Type Description Default
-b location Memory address Location in memory for
start of data. none
-l length Number Length of data 32
-s Boolean Format data using
Motorola S-records.
-1 Access one byte (8 bits) at
a time. Only the least
significant 8 bits of the
pattern will be used. -1
-2 Access two bytes (16 bits)
at a time. Only the least
significant 16 bits of the
pattern will be used. -1
-4 Access one word (32 bits)
at a time. -1
Description
Display a range of memory on the system console.
The x is a synonym for dump.
Note that this command could be detrimental if used on memory mapped hardware registers.
The memory is displayed at most sixteen bytes per line, first as the raw hex value, followed by an ASCII interpre-
tation of the data.
25