Toshiba TEC MA-1700 - Manual (Page 76)

E01-11040
RECEIPT AT PURCHASE RECEIPT AT RETURN
As shown in the sample above, the previous balance $4.59 is entered manually through the [AMT]
key on the righthand side receipt, while the same previous balance is automatically recalled by merely
designating the Customer File Code through the [PICK UP BAL] key on the lefthand side receipt.
The print formats in both receipts are designed to be the same from Customer File Code down to the
"NEW BAL” amount (resulting balance at the time of purchase.), except that the final new balance at
the time of return is additionally printed (which will be the same amount of the balance before the
purchase) and the
“El”
mode header is printed on the righthand side receipt.
3.3 SCALE ITEM ENTRY IN “Q” MODE
Any scale item entered in the “REG” or “MGR” mode at the time of purchase must be entered
manually (Manual Scale Entry but not Auto Scale) in the
“El”
mode at the time of return or cancel.
That is, for entering a scale item (once purchased) in the “ 0” mode, you must read the written net
weight on the item (if any) or read the net weight in the scale display panel by placing it on the scale
platter, then enter the net weight value, manually in the procedure described as Manual Scale Entry
operation in the OPERATOR’S GUIDE.
3.4 AMOUNT LIMIT RELEASE IN MODE
Amount limits programmed on [DOLL DISC), [VND CPN], [STR CPN], and [BTL RTN] may be
released in the "0” mode, i.e. the same handling as in the “MGR” mode.
- 8 -