Toshiba TEC MA-1700 User Manual
Page 117
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11040
NOTES: 1. Depress only the key(s) for the required status change(s). [RTN MDSE], [TX VM],
[TX2/M], [TX3/M], [StVM], [SI2/M], and [FS/M] keys will function to reverse from the
current status to the other.
2. For the name of each department, a maximum of 10 regular-sized or 5 double-sized
characters may be entered. A combination of both types is also available. If no name
is programmed for a department, the Department No. (ex. **DP01”) will be printed on
the receipt and reports as the Department name.
3.
If only a department name is set or changed, refer to the following operation sequence.
3 [@/FOR]-
■> ([SHIFT]) [DP] -
for the
shifted dept.
■»|Dept. No.| [DP#1-I
for a flat keyboard
Character Entries "
to change the depths
name
■►fST]
> [AT/TL]
Repeatable another dept to change only its name.
- 4 9 -