Toshiba TEC MA-1700 User Manual
Page 103
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671384/103/background.png)
E01-11040
1-3. When the PLU Keyboard PK-2 (hardware option) is connected;
1) Character Keys provided on the PK-2 Character Setting Sheet may be used to directly
enter the characters (DIRECT CHARACTER ENTRY method). Any characters not
provided there (and those provided as well) may be entered, in the CHARACTER CODE
ENTRY method, through the Numeric Keys and the [#] key on the ECR keyboard.
2
)
3)
All function keys ([C], [@/FOR], [ST], [AT/TL], etc.) must be operated on the ECR
keyboard.
In the following operations, however, the Character Setting Sheet should be removed and
the keys on the PK-2 are used as PLU Preset-code Keys:
PLU PRESET-CODE KEY SETTING (Submode 27)
PLU PRESET PRICE CHANGING (no submode) "• (This may be operated on the ECR
Keyboard as well.)
Case 2: When the ECR Keyboard is Flat Keyboard Tvoe :
The Flat keyboard will be set with the “Setting Mode Key Layout” in the programming
operations including the character entries. On this keyboard, functions and locations of keys
required in various programming operations are fixed. Most characters may also be entered
directly through this keyboard. The Character Code Entry method is also allowed.
The following operations may be executed with the “Setting Mode Key Layout”.
•
STORE NAME/MESSAGE AND COMMERCIAL MESSAGE PROGRAMMING
(Submodel)
•
CASHIER CODE AND NAME PROGRAMMING (Submode 2)
•
DEPARTMENT TABLE PROGRAMMING (Submode 3)
•
PLU TABLE PROGRAMMING (Submode 4)
•
SALESPERSON CODE AND NAME PROGRAMMING (Submode 20)
NOTE : The TKB-1 is not connectable to an ECR with Flat Keyboard.
- 3 5 -