Tare table setting (submode 26) – Toshiba TEC MA-1700 User Manual
Page 134
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EO-11040
TARE TABLE SETTING (Submode 26)
This operation will program the tare table No. to automatically subtract the tare weight from the scaled
weight.
Any time outside a sale
Mode Lock : SET / GT Lock : Neutral
26 (@/FORJ
1 Tare Table No. I fSTl ^
1 Tare Weiaht I f#l
1 to 9
1 to 999 :or 0 to reset
**(unit :1/100LB org)
Repeatable for other Tare Tables
* (Repeatable from here if the
Table No. is sequential from
the previous one.)
-► [AT/TL]
ex.) Enter 13 for 0.13LB.
Enter 25 for 25 g.
(The unit selection, LB
or g, is determined by a
programming option.)
ex.) To set the followings :
Tare Table No.1 with tare weight 0.13LB,
Tare Table No.2 with tare weight 0.20LB.
Mode Lock to SET, 26 [@/FOR]
1[ST113I#]
(2 [STJ) 20 [#J [AT/TLJ
T E C S T O R E
1343 PEACH DRIVE
PHONE: 87-Ó437
Thank you
CalL again
11-20-90
#0
ttl
0.13
« 2
0 - 2 0
0044 ll:26TM
- 6 6 -