Loading the batteries inserción de las pilas, Operating range of remote control unit, When making cable connections – Pioneer VSX-D510 User Manual
Page 8: Alcance del mando a distancia, Cuando haga las conexiones de cable, Tifjjíp ” ti, Tiiij
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Dry cell batteries (AA size lEC R6P) x 2
Loading the batteries Inserción de las pilas
CAUTION:
Incorrect use of batteries may result
in such hazards as leakage and
bursting. Observe the following
precautions:
• Never use new and old batteries
together.
• Insert the plus and minus sides of
the batteries properly according to
the marks in the battery case.
• Batteries with the same shape may
have different voltages. Do not use
different batteries together.
• When disposing of used batteries,
please comply with governmental
regulations or environmental public
instruction’s rules that apply in your
country or area.
Operating Range of
Remote Control Unit
The remote control may not work
properly if;
® There are obstacles between the
remote control and the receiver's
remote sensor.
• Direct sunlight or fluorescent light
is shining onto the remote sensor.
• The receiver is located near a
device that is emitting infrared rays.
• The receiver is operated simulta
neously with another infrared remote
control unit.
When Making Cable
Connections
Be careful not to arrange cables in a
manner that bends the cables over
the top of this unit as shown in the
illustration. If the cables are brought
over this unit, the magnetic field
produced by the transformers in this
unit may cause a humming noise to
8
come from the speakers.
En/Sp/ChH
¡PRECAUCION!
El uso incorrecto de las pilas puede
provocar situaciones peligrosas tales
como fugas o explosión. Tenga en
cuenta las siguientes precauciones:
• No utilice nunca pilas nuevas y
viejas al mismo tiempo.
• Inserte correctamente los lados
positivo y negativo de las pilas de
acuerdo con las marcas en la caja de
pilas.
• Hay pilas que tienen la misma
forma pero con distintos voltajes. No
utilice pilas diferentes al mismo tiempo.
• Cuando tiene que desembarazarte
de las baterías usadas, por favor se
adapte a los reglamentos govemamen-
tales o a las desposiciones en materia
ambiental en vigor en su país o área.
Alcance del mando a
distancia
El mando a distancia no funcionará
correctamente cuando:
• Hay obstáculos entre el mando a
distancia y el sensor a distancia del
sintoamplificador.
• Los rayos del sol o la luz
fluorescente se reflejan directamente
en el sensor a distancia.
• El sintoamplificador está instalado
cerca de un aparato caliente que está
emitiendo rayos infrarrojos.
• El sintoamplificador se utiliza
simultáneamente con otro mando a
distancia por infrarrojos.
Cuando haga las
conexiones de cable
No coloque los cables de tal forma que
se curven sobre este aparato, como en la
figura. Si los cables se dejan encima de
este aparato, el campo electromagnético
producido por los transformadores en el
aparato puede hacer que se escuchen
zumbidos por los altavoces.
“ + ” tifJJíP ” ti
fi»
•
> «Er-sts
^ »
tiiij »
P f » »
± »
l i í »
« »
’
mi
’ tai^i