Cannot be remote controlled, The display is dark or off, No puede controlarse con el mando a distancia – Pioneer VSX-D510 User Manual
Page 67: La pantalla se ve oscura o está apagada, Sílstaegl±№fl dimmer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

No sound is output or a noise is
output when software with DTS is
played back.
• Set the digital volume level of the
player to full, or to the neutral
position.
When a search is performed by a
DTS compatible CD player during
playback, noise is output.
• This is not a malfunction, but be
sure to turn the volume down to
prevent the output of loud noise from
your speakers.
Cannot be remote controlled.
• Replace the batteries (refer to page
8
) .
• Operate within 7 m, 30° of the
remote sensor on the front panel
(refer to page 8).
• Remove the obstacle or operate
from another position.
• Avoid exposing the remote sensor
on the front panel to direct light.
The display is dark or off.
• Press
FL DIMMER
on the remote
control repeatedly to return to the
default.
If the unit does not operate normally
due to external effects such as static
electricity disconnect the power plug
from the outlet and insert again to
return to normal operating condi
tions.
No sale ningún sonido o sale ruido
cuando se reproduce un programa
con DTS
• Ajuste el nivel de volumen digital
del tocadiscos a la posición total o
neutral.
Cuando se hace una búsqueda en un
tocadiscos de discos compactos
compatible con DTS, durante la
reproducción, sale ruido.
• Esto no es un mal funcionamiento
pero asegúrese de bajar el volumen
para evitar que salga ruido fuerte de
sus altavoces.
No puede controlarse con el mando
a distancia.
• Cambie las pilas (consulte la página
8
) .
• Haga funcionar a menos de 7 m,
30° del sensor a distancia en el panel
delantero (consulte la página 8).
• Elimine el obstáculo o haga
funcionar desde otra posición.
• Evite la exposición del sensor a
distancia en el panel delantero a la luz
directa.
La pantalla se ve oscura o está
apagada.
• Presione
F L DIM M E R
varias veces
en el mando a distancia para volver al
estado original.
Si el aparato no funciona normalmente
debido a efectos externos tales como
electricidad estática.
Desconecte el enchufe del
tomacorriente y vuelva a insertar para
volver al estado de funcionamiento
normal.
efiBSSDTs
±
’ :^4'Í
b
]
í
5 “
»
•
(MM) »
t|É<]30°
p¡
°
№ °
t
I
é
S °
• SílSTaegl±№FL DIMMER
mñ
’
«
mmmmmmì
67
En/Sp/ChH