beautypg.com

The bobbin, Wmbimq – Kenmore 1030 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

WmBIMQ

THE BOBBIN

0

1.

Draw thread from spool through

bobbin winder tension disc as shown
in Fig. 1.

2.

Pull end of thread through hole in

bobbin

and

place

bobbin

onto

bobbin winder shaft with end of
thread coming from the top of the
bobbin,

fitting

the

notch

on

the

bobbin over locking stud on the
shaft as shown in Fig. 2.

3.

Push bobbin winder latch against

bobbin until it clicks.

4.

Release clutch by pulling hand wheel

or turning clutch knob as shown in
Fig. 4. Start machine, holding onto
end

of

thread.

When

bobbin

is

slightly filled, release end of thread.

5.

When

bobbin

is

full,

winding

mechanism stops.

6.

Push in hand wheel or turning clutch

knob to return to stitching position.

Remove bobbin.

This manual is related to the following products: