Kenmore 1030 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SiWiNO LIGHT
The light and power switch shown in
Fig. 1 provides the electric current for
the motor as well as for the light.
In order to operate the machine, this
switch must be on. To turn on the light,
depress the upper side of the switch.
If you are interrupted while sewing
and must leave the machine unattend
ed, just turn off the switch and the ma
chine cannot be started accidentally.
The sewing light is located inside the
face cover plate as shown. To replace
the bulb, turn light off, and swing the
face cover plate open. Push up on the
bulb slightly and turn bulb clockwise.
Remove
bulb
from
socket.
Push
in
new bulb and turn counter-clockwise.
16