Zipper application, Regular zipper, Invisible zipper – Kenmore 1030 User Manual
Page 37: Cording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTINGS
Special Stitch Dial - Red Dot
Stitch Width Control - Red Dot
Stitch Length Control - 1 2 to 10
Zipper Foot
Use straight stitching plate.
REGULAR ZIPPER
The foot is adjustable for use on the
right or left side of the needle when
sewing the regular type of zipper.
Adjust the foot so the needle clears
the side notch on the foot. See Fig. 1.
Carefully follow directions given on
the zipper package.
ZIPPER APPLICATION
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing
through the center hole of the foot and
one groove of the foot is riding on the
teeth of the zipper.
See Fig. 2. Follow the zipper manu
facturer's instructions.
After zipper has been inserted, finish
sewing seam by shifting foot to side
position sewing through side notch.
CORDING
Foot can also be. used to make cording
for slipcovers etc. Cover a cord with
a strip of bias fabric and sew as shown
in Fig. 3.
36