Blind hemming – Kenmore 1030 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BLIND HEMMING
SETTINGS
Special Stitch Dial -
Stitch Width Control - 2 to 3
Stitch Length Control - 12 to 10
Zigzag foot or blindstitch guide
Use zigzag stitching plate.
After you have turned up the hem width
desired, turn raw edge over 1/2” and
stitch this fold with a basting stitch
Press.
Fig. 1 Raw edge fold
Fold hem back against right side of
garmet with basted raw edge extending
about 1/8” to right of garment fold.
Fig. 2 Flem folded back
34