Kenmore 1030 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'•m
'i
¡i
^ 1 ■
Step 1
Step 2
1.
Set special stitch dial at □ and bartack several times at the marked
beginning
of
the
buttonhole.
Stop
sewing
at
the
left
stitch.
Raise
needle
to
its
highest
position
by
turning
handwheel
toward
you
manually.
2.
Set special stitch dial at 'D . Stitch forward until the hinged portion of
the presser foot aligns with the dot on the left side of the buttonhole
guide foot. The toe of the presser foot will be touching the end of the
guide foot. Stop sewing at the left stitch and raise needle to its highest
position as in Step 1.
3. Set special stitch dial at □ again and bartack several times,
needle at its highest position as in steps 1 & 2.
Raise
4.
Set special stitch dial at □. and continue sewing until the hinged
portion of the presser foot aligns with the dot on the right side of the
guide foot. You will have reached the bartacking done in Step 1.
31