Brother FAX-210 - Manual (Page 54)

45
When the transmission has started, the LCD shows the receiver's fax number:
MSG CTR
— AUTO ANS
''-PASSWORD 00181522635842
NOTE:
There are severai things to keep in mind:
Program your fax number and destination name (see p. 20).
If you did NOT register the receiver's name (company name) aiong with his one-touch
or speed-diai number (as explained on page 22), or if you are using manual dialing, the
identification of destination will NOT be printed, but only the fax number will be
printed.
This function can only be performed in this manner if there is no document in the
document feeder.
CALL BACK:OFF
2. Tacking on the Callback Message as the Last Page of a Transmitted
Document
• Once in the Temporary Function Mode, press "0". The LCD will display:
_ MSG CTR
- AUTO ANS
•-PASSWORD
Select the ON or OFF setting using the cursor keys:
r- MSG CTR
— AUTO ANS
PASSWORD
CALL BACK:ON
Press SET to register the setting.
Press SET. Dial and start the fax transmission.
The following is an example of the Callback Message:
=== CALLBACK MESSAGE ==
TO: BROTHER INDUSTRIES
FAX: 001-81-52-263-5842
FROM: BROTHER INTERNATIONAL
FAX: 201-828-5881
PLEASE CALL AT (FAX): 2Q1-828-5891
brother
NOTE 1:
NOTE 2:
NOTE 3:
When you set CALL PICKUP ON, you can not set CALLBACK MESSAGE ON.
Remember that if you could not talk to your destination using the CALL PICKUP
function, the unit will automatically send a callback message.
When you set CALLBACK MESSAGE ON, you can not set CALL PICKUP ON.
When you use CALLBACK function, setting the number of rings of AUTO ANSWER
at 4 rings at each fax terminal is recommended. This is because when someone calls
you back, while the AUTO ANSWER is set at 1, your fax machine will enter the
message receiving condition if you do not pick up the handset before the second
ring.