Brother FAX-210 - Manual (Page 42)

33
C. Programming the Message Center and Recording the OGM
To program the Message Center, set the unit into the REGISTRATION & SETTING MODE by first
getting it into the FUNCTION MODE (no document in the feeder, press
FUNCTION) and then
pressing "1".
While in the REGISTRATION & SETTING MODE:
• Press "9". The LCD will display a selection. Press the appropriate number:
r- MSG CTR
MSG CTR(1-8)? Er AUTO ANS
^-PASSWORD
pressed Resultant chanae in the LCD Function
1 OGM TIME: 08 Qutgoing Message length selection
2 NOT USED
3 OGM: RECORD Recording of OGM
4 ICM#:3 Number of Incoming Messages that
can be recorded
5 CALL MSG: RECORD Automatic Paging Recording
6 PAGING:OFF Automatic Paging ON/OFF
7 MSG CTR CODE:fiO Registers security code for Message
Center Remote Operation
8 CALLTEL:_ Registers Automatic Paging destination
telephone number
This is what happens when you press an appropriate number. The numbers are shown in the left
column and the explanation of what happens is given to the right of the numbers. The first operation
must start with the LCD displaying:
r_ MSG CTR
— AUTO ANS
^PASSWORD
The subsequent operations can be started by using the NEXT key after completion of a
preceding operation.
To revert to the standby mode, press SET three times.
MSG CTR(1-8)?