Brother FAX-210 - Manual (Page 33)

24
V. SETTING USER SWITCHES
User Switches control a number of key parameters of the unit's operation, such as: Resolution,
Contrast, Audio Beeper, Transmit Report, Password Transmission, Automatic Answer and the
Number of Rings on which the unit will answer automatically.
Press "7" in the FUNCTION mode. The unit enters USER SWITCH SELECTION
MODE. The LCD will display:
MSG CTR
RES: STD
USER SW(0-9)? — AUTO ANS
^-PASSWORD
Pressing 1, 2, 3, 5, 6, 7,9 (4, 8, 0 are not used) will allow you to set the User Switches.
To revert to standby mode from USER SWITCH SELECTION MODE, press SET twice.
A. Setting the Resolution
1. Press "1" in the USER SWITCH SELECTION MODE. The LCD will display:
MSG CTR
— AUTO ANS
^PASSWORD
2. Use STANDARD to transmit typewritten or printed materials. Use FINE for
detailed drawings or detailed text. Use PHOTO when you need to transmit an
image with many shades, such as a photograph, a colored original, etc. Please
note that the transmission speed is highest at STANDARD resolution, slower at
FINE and quite slow in PHOTO. Thus, use PHOTO only when warranted.
NOTE: The factory setting is STANDARD resolution.
3. Select the RESOLUTION mode using the cursor keys. Choose from the
following displayed RESOLUTION modes:
MSG CTR
— AUTO ANS
^PASSWORD RES: STD
RES: FINE
. MSG CTR
AUTO ANS
■PASSWORD
RES: PHOTO
. MSG CTR
AUTO ANS
■PASSWORD
4. If you press SET , the resolution is selected and the display returns to the USER
SWITCH SELECTION MODE.
If you press NEXT, the resolution is selected and the display proceeds to the
next user switch (SET THE CONTRAST).
If you press STOP, the display returns to the standby mode without
registration.