Brother FAX-210 - Manual (Page 24)

15
FAX:201981030
Press MAN.DiAL. Dial the desired number using the ten key pad.
,-MSGCTR
— AUTO ANS
"^PASSWORD
If your desired number is more than 11 digits, the display will scroll, e.g.:
MSG CTR
— AUTO ANS
PASSWORD
AX:201981030012
When you hear the fax tone, press START. A completion tone will sound for one second
after the transmission is completed. The LCD will revert to the standby mode:
r- MSG CTR
— AUTO ANS
''-PASSWORD
01/01/89 00:00
FAX/COPY READY
FAX:201P981P030
b) Automatic transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
P- MSG CTR
— AUTO ANS
''-PASSWORD
Press MAN.DIAL. Dial the desired number using the ten key pad.
P- MSG CTR
— AUTO ANS
'-PASSWORD
If your desired number is more than 11 digits, the display will scroll, e.g.:
P- MSG CTR
— AUTO ANS
1-PASSWORD
Press START. The unit will start feeding a document and then start dialing, and initiate the
transmission automatically. A completion tone will sound for one second after the
transmission is completed. The LCD will revert to the standby mode.
P- MSG CTR
— AUTO ANS
'-PASSWORD
AX:201P981P0300
01/01/89 00:00
4. Redial button
When the telephone number was dialed, the telephone number dialed will be registered in
REDIAL button automatically.
If the number is busy in Automatic transmission, set the document in the feeder again.
Document will remain in the feeder in case of Manual transmission. Press HOOK or pick up the
handset and then press
REDIAL. The unit will redial the last number dialed. After hearing fax
tone, press START.