Brother FAX-210 - Manual (Page 19)

NEXT/REDIAL -
NEXT
REDIAL
1 I
10
NEXT is a registration/setting button in programming.
Pressing the REDIAL button redials a destination for which dialing has
already been attempted once (allows the redialing of the previously
dialed number). The LCD will display the telephone/fax number being
dialed :
- MSG CTR
~ AUTO ANS
-PASSWORD
TEL: 516P555P1212
(when using the unit as a telephone in non-auto-dial mode, press the
MAN. DIAL button - see below).
Pressing the REDIAL button causes the LCD to display the called
number again.
NOTE: If the power is turned off, the REDIAL memory of the
previously dialed number is lost. With the power ON,
pressing the
REDIAL button before any telephone number
has been dialed, will cause the LCD to display:
MSG CTR
— AUTO ANS
PASSWORD
REDIAL INVALID
SET/MANUAL DIAL -
SET
MAN.DIAL
Allows to dial telephone/fax numbers manually. Use for numbers not
stored in the unit's station memory.
SET is a registration button used during programming.
NOTE: The upper row of buttons - FUNCTION, NEXT, SET are shown in italics. More expianation
on the proper use of the above controi buttons wiii be provided in the body of this Manuai in
the appropriate pieces.
Other controls:
TONE/PULSE -
PULSE^ TONE
SPEAKER VOLUME -
SPEAKER VOL
RINGER VOLUME-
RINGER VOL
H L OFF
Located on the back of the unit. Allows you to set rotary or touch-
tone dialing.
Located on the back of the unit. This rotary control allows you to
adjust the volume of the monitor/speaker.
Located on the side of handset cradle, this control adjusts the
loudness of the ringing.