Brother FAX-210 - Manual (Page 22)

13
Press the desired one-touch number using the ten key pad. If you have already registered
the receiver's company name, the LCD shows the receiver's iD:
- MSG CTR
- AUTO ANS
-PASSWORD
FAX:BROTHER INDU
If you have not registered the receiver's company name, the LCD shows the registered
receiver's facsimile telephone number:
MSG CTR
— AUTO ANS
’-PASSWORD FAX:052P263P583
Press START. The unit will start feeding a document and then start dialing, and initiate the
transmission automatically. A completion tone will sound for one second after the
transmission is completed. The LCD will revert to the standby mode.
r- MSG CTR
— AUTO ANS
’-PASSWORD
01/01/89 00:00
2. Speed-dialing
a) Manual transmission
• Insert up to 5 documents into the feeder face down. The LCD shows:
MSG CTR
— AUTO ANS
’-PASSWORD FAX/COPY READY
Press HOOK or pick up the handset. The LCD shows:
MSG CTR
— AUTO ANS
’-PASSWORD FAX:
Press # and the desired 2-digit code using the ten key pad.
Example: If 03 stands for 201 981 0300, press "#", "0",and "3", and the unit will dial
201 981 0300. The LCD shows:
f_ MSG CTR
— AUTO ANS
’-PASSWORD
FAX:#03
FAX:BROTHER INTE
After one second, if you have already registered the receiver's company name, the LCD
shows the receiver's ID:
- MSG CTR
- AUTO ANS
-PASSWORD
If you have not registered the receiver's company name, the LCD shows the registered
receiver's facsimile telephone number:
- MSG CTR
- AUTO ANS
-PASSWORD
FAX:201 P981P0300