Brother FAX-220 - Manual (Page 62)

52
Use the cursor keys to select simple polling (simple polling means that a single
document is sent to a single receiver over a single telephone line). The LCD will
display:
POLLING:STD
MSG CTR
AUTO ANS
■ PASSWORD
3. Press SET twice. The LCD will display:
POLLING WAITING
— MSG CTR
— AUTO ANS
^PASSWORD
The unit is now ready to be polled by a remote facsimile machine.
Should you change your mind about being polled, return to step 1 by pressing
FUNCTION and "4". Next, select "POLLING:OFF", press SET twice and then press
STOP. Now, the document will be removed.
NOTE 1 : Callback Message, COVERPAGE™, and Call Pickup Alert cannot be used
with POLLING.
NOTE 2: Total number of pages to be transmitted can be set.
NOTE 3: If the unit is waiting to be polled, do not press HOOK or pick up the handset
when it rings.
B. Setting Your Unit to Poii Another Fax Unit
Make sure there is NO document in your feeder. While in the FUNCTION MODE (press
FUNCTION),
1 .
2 .
Press "4". Your unit goes into a POLLING REQUEST MODE. The LCD will
display:
MSG CTR
POLLING:OFF — AUTO ANS
^PASSWORD
Use the cursor keys to select simple polling (simple polling means that a single
document is sent to a single receiver over a single telephone line). The LCD will
display:
^ MSG CTR
— AUTO ANS
^PASSWORD
3. Press SET once. The LCD will request the fax number to be polled and display:
^ MSG CTR
— AUTO ANS
^PASSWORD
POLLING:STD
FAX:
4. Input the numbers using the ten key pad. To dial manually, press MAN.DIAL
first.
5. Press START and the unit will commence polling. The document will now be
received by your unit.
NOTE: If the remote fax unit did not have its polling function activated, your polling
request will be unsuccessful and the LCD will revert to the standby mode
(where it displays the date and time).