Brother FAX-220 - Manual (Page 20)

10
N E X T / R E D I A L -
NEXT
REDIAL
I I
TEL: 516P555P1212
NEXT is a registration/setting button in programming.
Pressing the REDIAL button redials a destination for which
dialing has already been attempted once (allows the redialing
of the previously dialed number). The LCD will display the
telephone/fax number being dialed :
. MSG CTR
AUTO ANS
•PASSWORD
(when using the unit as a telephone in non-auto-dial mode,
press the
MAN. DIAL button - see below).
Pressing the REDIAL button causes the LCD to display the
called number again.
NOTE: If the power is turned off, the REDIAL memory of
the previously dialed number is lost. With the
power ON, pressing the
REDIAL button before
any telephone number has been dialed, will cause
the LCD to display:
. MSG CTR
AUTO ANS
■PASSWORD
REDIAL INVALID
SET/MANUAL DIAL -
SET
MAN.DIAL
Allows to dial telephone/fax numbers manually. Use for
numbers not stored in the unit's station memory. SET is a
registration button used during programming.
NOTE: The upper row of buttons - FUNCTION, NEXT, SET are shown in italics. More
explanation on the proper use of the above control buttons will be provided in the body
of this Manual in the appropriate places.
Other controls:
TONE/PULSE -
PULSE TONE
SPEAKER VOLUME
SPEAKER VOL
RINGER VOLUME-
RINGER VOL
H L OFF
Located on the back of the unit. Allows you to set rotary or
touch-tone dialing.
Located on the back of the unit. This rotary control allows
you to adjust the volume of the monitor/speaker.
Located on the side of handset cradle, this control adjusts
the loudness of the ringing.