Brother FAX-220 - Manual (Page 29)

19
Input the appropriate numbers by using the ten key pad. As you press a number, the
digit appears at the current position of the cursor. If you wish to input a space, press
the right cursor key and the cursor moves to the next position.
When the input for fax telephone number ID has been completed, pressing NEXT will
bring you to the COMPANY NAME/DESTINATION NAME registration. And if you
do not touch any key for around 10 seconds after you have entered your fax
telephone number ID, it will be automatically registered and the LCD will revert to the
standby mode.
FAX:201 111 5881
Clearing a Registered RTI/TTI number
• To clear the RTI/TTI number, bring the number up on the LCD again.
P- MSG CTR
— AUTO ANS
PASSWORD
Make sure that the cursor is under the first digit of the number, and press PAUSE
three times. The LCD shows:
MSG CTR
— AUTO ANS
PASSWORD
FAX:_
Correcting Mis-registration
• To correct an incorrect number, you can overwrite the registration, but cannot insert a
number into it. For example, if you input "201 311 5881" for "201 111 5881",
bring the cursor to "3". Enter "1".
[- MSG CTR
— AUTO ANS
‘‘-PASSWORD
FAX: 201 1
Anything to the right of the cursor will be erased.
NOTE: You may use the PAUSE button to insert a pause, yet this inputs a "P". Then your
RTI/TTI number will appear like 201 P111P5881 both on the display and in print. If you
do not like this, use the cursor right key to insert a space as mentioned above.