Brother FAX-220 - Manual (Page 32)

22
IV. SETTING UP THE AUTO DIALER
A. Registering One-Touch Numbers
You can register ten (10) one-touch numbers (up to 22 digits each) and destination names
(up to 20 characters each) for convenient dialing.
1
.
3.
4.
5.
6 .
7.
8.
REGISTER(0-9)?
Press FUNCTION and “I". Now you are in the REGISTRATION & SETTING
mode.
r_MSGCTR
— AUTO ANS
'^PASSWORD
2. Press "3”. The LCD will display:
MSG CTR
— AUTO ANS
^PASSWORD
Select a digit from 0 to 9 under which you will register the one-touch number
For example, press "1". The cursor will move to the next digit of
MSG CTR
FXfi:
FX1: — AUTO ANS
"^PASSWORD
Use the numeric ten key pad to enter the appropriate telephone number, e.g.:
r- MSG CTR
FX1:201 — AUTO ANS
^PASSWORD
Use PAUSE to register a pause for PBX or overseas transmissions.
MSG CTR
FX1:201P
X1:201P981P0300_
- AUTO ANS
-PASSWORD
If you try to enter a telephone number of more than 11 digits, the display will
scroll to the left.
- MSG CTR
- AUTO ANS
-PASSWORD
If you wish to add a destination name (up to 20 characters), follow the
instructions in Step 8.
Otherwise, if you do not touch any key for around 10 seconds, the one-touch
number will be registered automatically and the LCD will revert to the standby
mode.
Press NEXT. This registers the fax (telephone) number, and now you can
register the name attached to the one-touch number. The LCD will show:
- MSG CTR
NAME: — AUTO ANS
^PASSWORD
Use the chart on page 21 to input up to 20 characters.