Brother FAX-220 - Manual (Page 43)

33
C. Programming the Message Center and Recording the OGM
To program the Message Center, set the unit into the REGISTRATION & SETTING MODE by
first getting it into the FUNCTION MODE (no document in the feeder, press
FUNCTION) and
then pressing "1".
While in the REGISTRATION & SETTING MODE:
• Press "9". The LCD will display a selection. Press the appropriate number:
MSG CTR
— AUTO ANS
^PASSWORD MSG CTR(1-8)?
r pressed Resultant chanae in the LCD Function
1 OGM TIME: 08 Outgoing Message length
selection
2 OGM/MEMO:STD Selects sound quality for
OGM/MEMO/ICM
3 OGM: RECORD Recording of OGM
4 ICM#:6 Number of Ingoming
Messages that can be
recorded
5 CALL MSG: RECORD Automatic Paging Recording
6 PAGING:OFF Automatic Paging ON/OFF
7 MSG CTR CODE:QO Registers security code for
Message Center Remote
Operation
8 CALL TEL:_ Registers Automatic Paging
destination telephone
number
This is what happens when you press an appropriate number. The numbers are shown in the
left column and the explanation of what happens is given to the right of the numbers. The first
operation must start with the LCD displaying:
MSG CTR
— AUTO ANS
■•-PASSWORD MSG CTR(1-8)?
The subsequent operations can be started by using the NEXT key after completion of a
preceding operation.
To revert to the standby mode, press SET three times.