Oiling the machine, Note, Oil behind the face cover – Kenmore 385.16120200 User Manual
Page 80: Oil the shuttle area, Cleaning the shuttle area
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oiling the Machine
Oil the points as shown at least once a year.
Use good quality sewing machine oil.
One or two drops of oil is sufficient. Remove excess oil,
otherwise it may stain fabric.
In case machine is not used for an extended time, oil it
before sewing.
NOTE:
Unplug the machine before oiling.
• Oil behind the face cover
Open the face cover and oil points as indicated in
illustration.
Oil the shuttle area
Open the shuttle cover by pulling down the embossed
part on the left side of the cover.
Oil the point as indicated in the illustration.
72