Kenmore 385.16120200 - Manual (Page 28)

Bobbin winding (continued)
Push the bobbin to the right.
0With free end of the thread held in your hand,depress
the foot control. Stop the machine when it has made a
few turns, and cut the thread close to the hole in the
bobbin.
[s] Depress the foot control again. When the bobbin is fully
wound, it stops automatically. Return the bobbin winder
to its original position by moving the spindle to the left
and cut the thread.
] Push the handwheel to the left to engage clutch.
* The machine does not function until the clutch is
engaged.
NOTE:
Position of the bobbin winder stopper is adjustable for the
required amount of thread on bobbin (example 1/2 full or
full etc.). Use a screwdriver and loosen the screw one turn
or less to adjust the position of the bobbin winder stopper.
Do not take out the screw all the way.
20