To drop or raise the feed dogs, Darning, Note – Kenmore 385.16120200 User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To Drop or Raise the Feed Dogs

(T) To drop the feed dogs, press the lever in the direction of

the arrow as illustrated.

@ To raise the feed dogs, push the lever in the direction of

the arrow as illustrated.

Feed dogs must be up for normal sewing.

Darning

0 Stitch selector:

1 or 2

(2) Stitch length:

Any

(3) Needle thread tension:

1 to 4

0 Presser foot:

Removed

® Feed dog:

Dropped

PATTERN

C .1

III

LENGTH

'111=

lll^

Drop the feed dogs {see above) and remove presser foot.
Place fabric,with the hoie in the center, on an embroidery
hoop. Lower the presser bar and sew at slow speed.
Move the fabric back and forth slowly until the darning area
is covered. Turn the fabric a 1/4 turn (90°) and sew
another layer of stitching over the first layer.

NOTE:
If fabric is thin or badly damaged, use a separate piece of

fabric under the hoie to reinforce it.