AvMap EKPIV series - Manual (Page 67)

67
beeper sounds Off. The default setting is On.
14.1.2 Scale Format
Selects the desired setting for display of the map scale in the Data Window field.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” + ‘ENTER’ +
“SCALE FORMAT” + ‘ENTER’
The selection options are:
BAR - the width of the screen is equal to the bar length times the number displayed.
LeveL - a letter associated with C-MAP’s chart cell level is displayed.
WIdth - the width of the screen is displayed.
Use the cursor key to select and ‘ENTER’ to accept. The default setting is Bar.
14.1.3 Language
Selects the language in which you wish menu information to be displayed (i.e. screen labels, menus
and options). Map detail will remain in English.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” ‘ENTER’ +
“LANGUAGE” + ‘ENTER’
Use the cursor key to select and ‘ENTER’ to accept. The default setting is English.
14.1.4 Military Frequency
The display of Military Frequency data can be set to ON or OFF (this data is found in European
Database cards).
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” + ‘ENTER’ +
“MILITARY FREQUENCY” + ‘ENTER’
Use the cursor key to select and ‘ENTER’ to accept. The default setting is Off.
14.1.5 nearest Airports
This function allows to choose the airports to be displayed (All, Airports, Airfields ) when pressing
the PAGE button.
14.1.6 terrain Legend
Enables/Disables the legend box in the lower left corner of the display when in the MOVING MAP
MENU any of the TAWS features is selected.
14.1.7 Power Save
Selects one of the three modes of power save when the batteries are used: Off, Minimum or
Maximum
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “GENERAL SETUP” + ‘ENTER’ +
“POWER SAVE” + ‘ENTER’
Use the cursor key to select and ‘ENTER’ to accept. The default setting is MIN.
14.1.8 Layout
The EKP-IV has the capability to orient the display in the Vertical or Horizontal mode.