AvMap EKPIV series - Manual (Page 32)

3
3.5.10.3 Land Settings
The Land Settings menu controls the level of cartographic detail shown.
Roads : ON/OFF. The default setting is On.
Road Labels : OFF/AMERICAN/EUROPEAN. The default setting is American.
Railroads : ON/OFF. The default setting is On.
City names : ON/OFF. The default setting is On.
Rivers & Lakes : ON/OFF. The default setting is On.
Cultural Features : ON/OFF. The default setting is On.
natural Features : ON/OFF. The default setting is On.
Landmarks : ON/OFF. The default setting is Off.
3.5.10.4 Marine Settings
Bathymetric & Soundings : ON/OFF. The default setting is On.
navigational Aids : ON/OFF. The default setting is On.
3.5.10.5 other Settings
User Points : OFF/ICON/ICON LABEL. The default setting is Icon/Label.
objects overlap : ON/OFF. The default setting is On. When more then one object is at the same
position, the selection of On allows the screen to draw the objects overlapping.
LAt/Lon Grid : ON/OFF. The default setting is Off.
3.5.11 terrains
The shaded elevation map — Terrain Depiction — and associated software features are designed
to aid pilots by graphically and numerically displaying the approximate elevation of any location on
the map. It is not designed to replace any onboard altitude/elevation instrumentation (i.e. altimeters
or other altitude/elevation measuring devices).Terrain Depiction can be displayed in either the
Vertical or Horizontal display modes.
The “Map Orientation” is set to Track-Up and the Terrain Depiction is set to ON at system start-up,
and can be changed as needed (see below for instructions on how to change the Map Orientation
from Track-Up to Course-Up or North-Up, as well as how to turn OFF the Terrain Depiction Shaded
Land Elevations).
Note
Course Up mode with Terrains (TAWS) is aligned to Track Up behaviour and Map rotation on TRACK UP mode is
made continuously in accord with the HEAD UP RESPONSE setting when in any TERRAIN mode.
3.5.11.1 terrain “on”
With the “Terrain” set to ON, the following occurs:
• With Map Orientation set to North-Up and Track-Up, the Terrain Depiction is displayed on all
mapping scales from 1 Nm and above. No Terrain Depiction is displayed with the mapping scale
from1/ Nm and below.
• With the Map Orientation set to Course-Up, no Terrain
Depiction occurs on any map scale.
note : Terrain Depiction is disabled at 1/ mile and below to allow for a normal Track-Up Map
Orientation to be used thus allowing for airport traffic patterns to be displayed on the map.
To turn-on/off the land elevation mapping, follow these steps:
> ‘MENU’ + “TERRAIN” + ‘ENTER’