ALTANA Cloud-Runner Manual - Manual (Page 50)

49
While adjusting the Display Time, you entered a
value outside the valid range from 15 - 99. Please
repeat the entry with a valid value.
Appears when the maximum number of
measurement series is reached for the selected
memory area.
No more free memory capacity available. Delete
measurement series which are no longer required.
Appears when you have measured 100 checkzones
with one memory area. Create a new memory area
and continue your measurements.
When attempting to measure an Organizer near the
end of memory capacity, the instrument can detect,
based on the Organizer structure, that memory will
be exhausted before the end of the measurement
series. It then generates this error before the
measurement begins.
Info and error messages
Error Messages