ALTANA Cloud-Runner Manual - Manual (Page 49)

48
Info and error messages
Identifies an internal error. Load a firmware update.
When in doubt, call the Customer Service
department.
The measurement unit was moved across the
sample too fast. The measurement is invalid and
must be repeated.
The operate key was released before the full
scanlength was reached. Perform a new
measurement.
Day or month falls outside the valid range of 1 - 31
or 1 - 12. Repeat the entry.
Appears when the number of measurements in
“Memory-Config Change” is set to a value less than
1 or greater than 20. Repeat the setting with a value
between 1 and 20.
The specified year falls outside the valid range from
2000 to 2100. Please repeat the input with a valid
year.
Error Messages