ALTANA Cloud-Runner Manual - Manual (Page 16)

15
Power supply
3.2 Docking station power supply
Power is supplied to the docking station through the
external power supply unit. Connect the external
power supply unit to the docking station. Connect
the appropriate end of the power connection line to
the power supply unit and the plug end of the power
connection line to the power outlet after verifying
that the specifications of the power supply unit
match the power source in terms of current and
voltage.
1 2
3.3 Charging the rechargeable battery
The rechargeable battery pack included with delivery
may be charged in the docking station. Charging
time for an empty battery pack is aprox. 2 hours.
Please note chapter “Safety Instructions”!
1. Battery pack in the instrument:
The lithium ion rechargeable battery will begin
charging immediately upon insertion of the
instrument into the docking station. To do this,
power must be supplied to the docking station
through the corresponding power supply unit.
Insert the measurement unit into the docking station
as shown in the neighboring illustration.
2. Battery pack on docking station:
A second charging shaft is located behind the shaft
for the instrument. Insert the second battery pack
here for charging, so it will be handy at any time to
replace the other battery when it is discharged.
Charging indicator for:
1:
additional battery pack
2: instrument
Indication light:
green: ready
red:
charging