ALTANA Cloud-Runner Manual - Manual (Page 24)

23
Measure
MEMORY Default memory for single measurements
MY MEMORY User-defined memory (appears only if
generated under “Memory” menu)
Standard To verify the device function on the test panel
My Model Measurement with Organizer (appears only if
loaded from PC)
Memory
Config. New Create a new memory
Config. Change Change the settings of a memory
Config. Delete Delete a memory
Data View View measured data of a memory
Data Delete Delete measured data
Setup Change the language, date/time and switch-
off time; activate audio signal and
confirmation by scroll wheel.
7.2 Overview of main menu
Menu operation