ALTANA Cloud-Runner Manual - Manual (Page 38)

37
Memory
11. Memory
In the Memory menu you can create new memories
with a configuration according to specific needs
(e.g. scales, statistics). Also, the configuration of
existing memories can be changed. Memories
which are no longer needed, will be deleted with the
function “Config Delete”.
Additionally, the menu allows to recall or delete a
measured test series.
11.1 Configuration New
After selecting this menu item, you will be prompted
to enter a name for the new Memory (Parameter 1).
Enter a name by using the scroll wheel. When
finished, press the “operate” button.
A display appears to check and confirm the entries.
The next step allows to copy the configuration from
an existing Memory or Organizer. Select the desired
entry from the list.
A menu will then appear with the copied
configuration for the new Memory.
To change the settings, refer to chapter 9 and 10.
To exit the menu, activate the arrow at the top of the
list. A confirmation display appears to complete the
creation of a new memory. The display now returns
to the Memory menu.