ALTANA Cloud-Runner Manual - Manual (Page 28)

27
Interrupt Checkzone
This function allows you to exit a checkzone/sample
before reaching the preset number of measurements
or to skip a checkzone. Then you can continue the
measurement series with the next checkzone.
If Interrupt is not activated in the Configuration menu
(Chapt. 9) or the Configuration of the selected
Organizer, a message will be displayed.
Parameter Info
Gives you an information about the selected
parameters of the sample.
End Test Series
Ends the entire measurement series. A confirmation
display appears. The instrument returns to the
Measure menu.
If Interrupt is not activated in the Configuration, a
message will be displayed in the case that the test
series is not finished yet.
Note:
Only complete series can be saved, i.e. you can
exit series only by deletion.
Measure