A&D Weighing AD-4407 - Manual (Page 36)

Page 34 AD-4407 Weighing Indicator
Output of Accumulation Data
Accumulated data can be output to the serial interface.
Output by manual or automatic, and output data format is selected at f41 of the
F-function setting.
F41
Parameter
Manual/Automatic Format
0 No output
* 1 Manual
2 Automatic
Fixed format
3 Manual
4 Automatic
Format 1(selected at f34)
5 Manual
Accumulated data
output at
accumulated data
display
6 Automatic
Format 2(selected at f35)
Step 1 Press the TOTAL key to display total and the accumulated data.
Step 2 If automatic output is set, the data is output once at that timing.
Step 3 If manual output, by pressing the PRINT key while the accumulated data is displayed,
the data is output.
Fixed data format :
9. 9. 9. 9. Code Memory Code Memory Code Memory Code Memory
This indicator has four code memories (1 through 4). Each code memory stores a set
of setpoints, preset tare and the unit weight for piece counting.
The data is stored in non-volatile memory, and is not lost even if the AC power supply
is disconnected or cut off.
Memory number 0 is a temporary memory and the data is lost when the AC power
supply is disconnected or cut off.
The active code memory number can be changed by key switch, external control
input, or a command via the serial interface.
The data set can be copied from one code memory to another code memory.
8. Accumulation