Display and operation – A&D Weighing AD-4407 User Manual
Page 35
AD-4407 Weighing Indicator
Page
33
8.1.2.
Display and Operation
Action of Accumulating Data
When accumulating data, the display blinks once.
If the accumulated data is stored, the M+ mark is displayed.
Caution
This function can not accumulate data with a different unit. Specify a unit
before use.
Display of Accumulation Data
When
specifying
Cf08 1 (Effective accumulation function) and pressing the
TOTAL
key, the
total is
displayed and the total data is displayed with the M+ mark
blinking . Pressing the
total
key alternatively displays the accumulated data and
the accumulation count. Pressing the
ESC
key, the weight data is displayed.
The total data can be output. Refer to "Output of Accumulation Data".
Undoing the Accumulation Data
The last weight data can be deduced from the accumulated data unless new data
has been accumulated.
Step 1 Press the
TOTAL
key to display
total
and accumulated data.
Step 2 Press and hold the
+/-
key for more than 3 seconds. The display blinks once and
the data accumulated before accumulating the last weight data is displayed.
Caution
External input can not be used.
Clearing the Accumulation Data
Step 1 Press
TOTAL
key to display
total
and accumulated data.
Step 2 Press and hold the
ZERO
key more than 3 seconds. The display blinks once and
the accumulated data is cleared.
Caution
External input can not be used.
Initializing the Data Number and Clearing the Accumulated Data at the same time
When the data number is included with the data of the serial data output, initializing
the data number and clearing accumulated data can be done at same time.
Step 1 Press
TOTAL
key to display
total
and accumulated data.
Step 2 Press and hold the
ZERO
and
+/-
keys at the same time for more than 3 seconds.
The display blinks once and the accumulated data is cleared. And the data
number is initialized (1).
Caution
External input can not be used.
8.
Accumulation