A&D Weighing AD-4407 - Manual (Page 11)

AD-4407 Weighing Indicator Page 9
9 ESC key The key to proceed to the next step without changing the data.
NET/GROSS key The key to select net or gross weight in the display.
+/- key
The key to select the sign of a value.
ENTER key The key to confirm parameters and stores the data.
PRINT key The key to output data (press quickly).
ON/OFF key The key to turn the indicator on and off (OFF: hold for 3 seconds).
4.1.2. Rear Panel Description
No. Name Description
10 Adjustment knob Adjust the viewing angle.
11 Power cable Connect to the AC power source.
12 CAL switch (cover) CAL switch is located inside the panel.
13 Grounding terminal Connect to earth ground.
14 Load cell cable cramp Tighten to protect from water and dust.
15 Interface cable cramp Tighten to protect from water and dust.
Caution Please confirm that the receptacle type and local voltage is correct for
your indicator (scale).
4. Description of panels and symbols
10
11
12
13
14
15