KEYENCE CV-X Series User Manual
Page 5
KEYENCE CORPORATION. Vision System Division
‐ 5 ‐
www.keyence.com
11
Select "Transfer to PLC" from the
"Monitor/Simulator" menu in KV STUDIO.
12
Restart both the CV-X100 Series and the KV Series.
When the connection is successful, the LINK LED
(green) will start flashing on the KV Series Ethernet
port.
Successful connection can also be confirmed by
selecting "Communications & I/O" ‐ "EtherNet/IP" in
"Global" on the CV‐X100 Series, and checking the
"Cyclic Communication Status".
If the LINK LED on the KV Series Ethernet port stays lit
(does not flash) or does not light
The EtherNet/IP may not be set up correctly, the cables may
not be connected correctly, or the CV‐X100 Series may not
be started up. Check the connection equipment (if a
crossover cable is being used as a LAN cable when
connected directly, if the HUB is working, etc.)
- GL-R Series (12 pages)
- GL-RHG Series (136 pages)
- GL-RHG Series (12 pages)
- GL-T11R (8 pages)
- SL-U2 (2 pages)
- SL-C Series (1 page)
- SL-V Series (10 pages)
- SL-V Series (168 pages)
- SL-C Series (54 pages)
- SL-M Series (8 pages)
- SL-T11R (6 pages)
- SL-VH1S (60 pages)
- SL-VHS Series (10 pages)
- SL-CHG Series (54 pages)
- SL-CHS Series (54 pages)
- SL-R11 (42 pages)
- SL-R11E (46 pages)
- SL-R12EX (76 pages)
- SJ Series (1 page)
- SJ-H Series (14 pages)
- SJ-HA Series (12 pages)
- SJ-HS/HW/HM (2 pages)
- SJ-F2000 Series (4 pages)
- SJ-F031 (10 pages)
- SJ-F300 Series (14 pages)
- SJ-F100W/100/010 (56 pages)
- SJ-M400 (14 pages)
- SJ-M100 (16 pages)
- SJ-M201 (16 pages)
- SJ-M300 (14 pages)
- CA-CNX10U (4 pages)
- CA-DC21E (2 pages)
- CA-HX048C (2 pages)
- CA-HX200C (2 pages)
- CA-HX500C (2 pages)
- XG Series (22 pages)
- XG VisionTerminal (58 pages)
- XG-8000 Series (12 pages)
- XG-8700T (12 pages)
- XG-7000 Series (8 pages)
- CA-H2100C (2 pages)
- CA-U4 (2 pages)
- CV-X Series (22 pages)
- CV-X Series (24 pages)