KEYENCE SK-1000 Series User Manual
KEYENCE Sensors

1
E SK-1000 IM
Inline Static Sensor
SK-1000 Series
Instruction Manual
Introduction
This manual describes the operations of and information related to the SK-1000
Series.
Read this manual carefully to ensure the safe performance and function of the
SK-1000 Series.
Keep this manual in a safe place for future reference.
Ensure that the end user of this product receives this manual.
Symbols
The following symbols are used in this instruction manual to enable you to
recognize important information at a glance.
Be sure to read this section carefully.
Important
Indicates cautions and limitations that must be followed during
operation.
Point
Indicates additional information on proper operation.
Reference
Indicates tips for better understanding or useful information.
Indicates the reference pages in this manual or the reference pages in
separate manuals.
Read this instruction manual before using the product in order to achieve
maximum performance.
Keep this manual in a safe place after reading it for future reference.
DANGER
Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in product
damage as well as property damage.
96M13428
Table of Contents
Precautions for Regulations and Standards .................................................. 2
Mounting and Wiring the Sensor Amplifier ....................................... 4
Connecting and Mounting the Sensor Head .................................... 5
Operation When the Power is Turned on for the First Time ..............7
Operations on the Main Screens ...................................................... 7
Initial Reset (Initialize) .......................................................................8
Setting the Tolerance Values ............................................................ 9
Zero Shift Function
(Shifting the Internal Measurement Value (R.V.)) .............................9
Bank Function (Registering Multiple Tolerance Setting Values) ......9
Key Lock Function 10
Basic Settings and Advanced Settings .......................................... 10
Simulation Mode .............................................................................17
Specifications ................................................................................. 17
Circuit Diagram .............................................................................. 18
Dimensions .....................................................................................18
Response Time ............................................................................... 19
Troubleshooting .............................................................................. 19
Display Screen and Output ............................................................ 21
Factory Setting (Default Value) List ................................................21