Holtgreven Truck Scale Resources - Manual (Page 31)

PT300 Users manual
Rev G, Feb 2011
Page 31 of 44
Calibration menu
To initiate calibration simultaneously press the PRINT/ACCUMULATE and ZERO buttons. The
display will show “StEP
StEP StEP StEP”, if it does not, the calibration strap is incorrectly placed to allow
calibration. Return to ‘Calibration Enable Jumper’ section to verify correct setting. Press the
PRINT/ACCUMULATE button to access the parameter setting.
At times it will be necessary to enter up to a five digit number. When this is necessary the current
number will be displayed with the right most digit flashing. The flashing digit may be incremented
by pressing the LOCAL/TOTAL button. To move one digit to the left, press the ZERO key. When
you have finished entering a number press the PRINT/ ACCUMULATE button. The settings are
saved once PRINT/ACCUMLATE is pressed to advance the menu, and the scale can then be
turned off.
Step Function Note Default
StEP StEP StEP StEP skip 000= no skip
001= skip to Weight Calibration
003= skip to cornering routine 000 000 000 000
U UU U. EnA EnA EnA EnA Unit enable Yes or no YES YES YES YES
bP 1 bP 1 bP 1 bP 1 grad break point 1 Enter weight 00000 00000 00000 00000
bP 2 bP 2 bP 2 bP 2
grad break point 2 Enter weight 00000 00000 00000 00000
bP 3 bP 3 bP 3 bP 3
grad break point 3 Enter weight 00000 00000 00000 00000
AdC AdC AdC AdC.rt rt rt rt ADC rate 0 or 1 1 11 1
A2t A2t A2t A2t AZT (auto zero tracking) 1 d, 3 d, .5 d, oFF, or.6 d 1 d 1 d 1 d 1 d
2Er0 2Er0 2Er0 2Er0.r rr r
Zero range 0= off, 1= 1%, 2= 2%, 3= 5%,
4 = 1%
0 00 0
g g g g rAd rAd rAd rAd graduation size 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5,
10, 20, 50, or 100 d 1 d 1 d 1 d 1
SAVE SAVE SAVE SAVE Displays for 1 sec and advances
CAP CAP CAP CAP
capacity Enter scale capacity 20000 20000 20000 20000
LL-01 LL-01 LL-01 LL-01 No weight applied
HH HH HH HH
-
01 01 01 01
First weight Enter first weight
LL LL LL LL
-
01 01 01 01
First weight Load first weight
HH HH HH HH
-
02 02 02 02
Second weight Enter second weight
LL LL LL LL
-
02 02 02 02
Second weight Load second weight
HH HH HH HH
-
03 03 03 03
Third weight Enter third weight
LL-03 LL-03 LL-03 LL-03
Third weight Load third weight
HH-04 HH-04 HH-04 HH-04
Fourth weight Enter fourth weight
LL-04 LL-04 LL-04 LL-04
Fourth weight Load fourth weight
10 points available to enter 3 minimum recommended