Holtgreven Truck Scale Resources - Manual (Page 16)

PT300 Users manual
Rev G, Feb 2011
Page 16 of 44
Accumulation Print mode. (TOTAL icon flashing). After accumulation, remove the first group
of items from the scale(s).
3. With the next group of items stable on the scale(s), press the PRINT/ACCUMULATE button.
This will add the total weight to the accumulated total. If you are using a printer, a print ticket
with all weights will now be printed.
4. Repeat step 3 as needed. If the accumulated total becomes too large to display, the “diSP
diSP diSP diSP”
message and error icon will be displayed.
5. When finished, you may clear the accumulated total weight by pressing and holding the ZERO
button until the display show “CLr CLr CLr CLr.t tt t“. The display will clear the accumulated total and the
number of accumulations.
Note: The scale will not accumulate when the weight is negative, zero, or if the weight is in
motion. A display message “Ac
Ac Ac Ac.Err Err Err Err” with error icon will be displayed if any of those
conditions are present. After a successful accumulation the scale must return to zero
before you accumulate the next weight. If you attempt to accumulate the next weight
before allowing the scale to return to zero, a display message “Ac
Ac Ac Ac.Err Err Err Err” with error icon will
be displayed.