Holtgreven Truck Scale Resources - Manual (Page 23)

PT300 Users manual
Rev G, Feb 2011
Page 23 of 44
14. The display will show “rF CH rF CH rF CH rF CH”. Press the PRINT/ACCUMULATE button. The flashing digit
shows the current setting. All scales in a system must be set to the same radio channel
setting in order to communicate with each other. Use the LOCAL/TOTAL button to
increment and the ZERO button to move the number flashing to the left. When the display
shows the desired number, press the PRINT/ACCUMULATE button.
15. The display will show “rF rF rF rF.PAn PAn PAn PAn”. Press the PRINT/ACCUMULATE button. The display will
show the current setting with the number on the right flashing. All scales in a system must
be set to the same Personal Area Network ID setting in order to communicate with each
other. Use the LOCAL/TOTAL button to increment and the ZERO button to move the
number flashing to the left. When the display shows the desired number, press the
PRINT/ACCUMULATE button.
16. The display will show “rF rF rF rF.ECP ECP ECP ECP”. Press the PRINT/ACCUMULATE button. The display will
show the current setting flashing. This is the encryption enable status and is either on or
off. Use the LOCAL/TOTAL button or the ZERO button to toggle between the settings.
When the desired status is flashing, press the PRINT/ ACCUMULATE button. If “Yes
Yes Yes Yes” was
selected go to the next step. If “no no no no” was selected got to step 17.
17. The display will show “00000 00000 00000 00000” with the number on the right flashing. Use the
LOCAL/TOTAL button to increment and the ZERO button to move the number flashing to
the left. Enter any number from 0 to 65534. This is the encryption key. For security
purposes, this setting is not accessible to view and will always show as “00000
00000 00000 00000”. If you
don’t want to change the key enter “00000 00000 00000 00000” to leave it unchanged. All scales in a system
must be set to the same encryption key setting in order to communicate with each other.
When the desired encryption key is displayed, press the PRINT/ ACCUMULATE button.
18. The display will show “rF rF rF rF.dEF dEF dEF dEF”. Press the PRINT/ACCUMULATE button. The display will
show “0 00 0” with the number flashing. Use the LOCAL/TOTAL button to increment and the
ZERO button to decrement the number. Setting the number to 3 will restore the default
radio settings. All other numbers will have no affect on the radio set-up. When the desired
number is flashing, press the PRINT/ ACCUMULATE button. The scale will return to
normal weighing.
If the scale does not have the radio option installed, the “rF CH rF CH rF CH rF CH”, “rF Pan rF Pan rF Pan rF Pan”, “rF ECP rF ECP rF ECP rF ECP” and the
Encryption key will be view only.