Hardy WS100 Configuration Software - Manual (Page 22)

Chapter 4 - Setup
4-7
requires a total of 43 integer words: 21 for
the M0 file, 21 for the M1 file, and 1 as a
flag.
FIG. 4-5 CHECKING “USE INTEGER FILE. . . “/SLC 5/02
Comm Setup for
the HI 1746WS
Remote Rack The ladder logic example below must be running so
that the WS100 Configuration Software will work
with the 1746 module installed in a Remote Rack. The
addresses shown in the ladder logic example are arbi-
trary locations. If the file is added to an existing pro-
gram, these address locations can be changed for the
system to insure there are no conflicts. The color cod-
ing of the locations is as follows:
Legend Green: Slot # for scanner module in local
rack and portion of the M file to be
used.
Yellow: Integer files used for data defining
the M file, (read/write, length,
address). Also status/error bits per-
taining to the transfers of data.