Compex Energy mi-Ready - Manual (Page 181)

179
English
Compex Energy is designed for use in the electromagnetic environment stipulated
below. The buyer or user of the Compex Energy must ensure it is used in this
recommended environment.
- ELECTROMAGNETIC IMMUNITY
NOTE: VT is the AC supply voltage before application of the test
level.
Electromagnetic
environment - guide
Floors must be wood, concrete or ceramic tiles. If floors are covered with synthetic material, the relative
humidity must be maintained at a minimum of 30%.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment.
If the Compex Energy user requires continuous operation during mains power cuts, we recommend
that the Compex Energy is powered by a UPS or a battery.
Magnetic fields at the mains frequency should be at the level of a representative
site located in a typical commercial or hospital environment.
ENERGY2 FR DE IT ES EN:ENGY Man FR 31/01/08 14:36 Page 179