Compex Energy mi-Ready - Manual (Page 154)

152
English
4. Storage and
transportation conditions
T he Compex contains rechargeable
batteries. This is why it must be stored
and transported in accordance with the
following conditions:
Storage and transportation temperature:
from -20°C to +45°C
Maximum relative humidity: 75%
Atmospheric pressure: 700 hPa to 1060 hPa
5. Conditions of use
Temperature: 0°C to 40°C
Relative humidity: 30% to 75%
Atmospheric pressure: 700 hPa to 1060 hPa
Do not use in areas where there is a risk of
explosion.
6. Elimination
T he main purpose of the 2002/96/EEC
Directive is to prevent the creation of
waste electrical and electronic equipment
(WEEE) and to reduce the amount of
waste to be disposed of by encouraging
reuse, recycling, and other forms of
recovery. The wheelie bin pictogram with
the bar through it means that the
equipment cannot be discarded with
household refuse, but that it must be
collected selectively. The equipment must
be delivered to a suitable collection point
for treatment. By doing so, you will be
contributing to the safeguarding of
natural resources and health.
B atteries must be disposed of in
compliance with relevant national
regulatory requirements.
7. Standards
T he Compex complies with current
medical standards.
T o guarantee your safety, the Compex has
been designed, manufactured, and
distributed in compliance with the
requirements of European Directive
93/42/EC on medical devices.
T he Compex also complies with the IEC
60601-1 standard on general safety
requirements for electro-medical devices,
the IEC 60601-1-2 standard on
electromagnetic compatibility, and the
IEC 60601-2-10 standard on particular
safety requirements for nerve and muscle
stimulators.
C urrent international standards require
that a warning be given concerning the
application of electrodes to the thorax
(increased risk of cardiac fibrillation).
T he Compex also complies with Directive
2002/96/EEC on waste electrical and
electronic equipment (WEEE).
8. Patents
T he Compex incorporates several
innovations with patents pending.
ENERGY2 FR DE IT ES EN:ENGY Man FR 31/01/08 14:36 Page 152