Checkline Series-5I - Manual (Page 32)

Model 5i Digital Force / Torque Indicator User’s Guide
31
13.2 Factory Settings
Parameter Setting
Set points
Upper Disabled (defaults to 80% of full scale, compression, when enabled)
Lower Disabled (defaults to 40% of full scale, compression, when enabled)
Filters
Current
8
Displayed 1024
Average mode Disabled
Initial Delay 0
Trigger Force / Torque 10% of full scale
Averaging Time (sec.) 5.0
External Trigger Disabled
DATA Key Functions
RS-232/USB Output Enabled
Mitutoyo Output Disabled
Memory Storage Enabled
Backlight Auto
Minutes
1
Serial/USB
RS-232 Output Selected
Enabled
USB Output Selected Disabled
Baud Rate 9,600
Data Format Numeric + units
Auto Output Disabled
Outputs per Sec. 125
Mitutoyo BCD Output Disabled
Automatic Shutoff Enabled
Minutes 5
Beeps
Keys
Enabled
Alerts Enabled
Set Points Momentary
LCD Contrast 10
Initial Settings
Units Depends on sensor
Mode Real Time
Passwords All passwords disabled