Checkline Series-5I - Manual (Page 31)

Model 5i Digital Force / Torque Indicator User’s Guide
30
13 SPECIFICATIONS
13.1 General
Accuracy: ±0.1% of full scale ±1 digit + sensor
Sampling rate: 7,000 Hz
Power: AC or rechargeable battery. Low battery indicator appears when battery level is low, and
indicator powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units:
lbF, ozF, gF, kgF, N, kN, mN, lbFft, lbFin, ozFin, kgFm, kgFmm, gFcm, Nm, Ncm, Nmm
(depending on sensor)
Outputs:
USB / RS-232: Fully configurable up to 115,200 baud. Includes Gauge Control Language
2 for full computer control.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VCD, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Configurable
settings:
Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default
settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight,
calibration
Weight: 0.7 lb [0.3 kg]
Included accessories:
Carrying case, AC adapter, battery, USB cable, resource CD (USB driver, MESUR TM Lite
software, MESUR TM gauge DEMO software, and user’s guide), NIST-traceable certificate
of calibration
Warranty: 3 years (see individual statement for further details)