Checkline Series-5 - Manual (Page 29)

Series 5 Digital Force Gauges User’s Guide
28
13 SPECIFICATIONS
13.1 General
Accuracy: ±0.1% of full scale ±1 digit
Sampling rate: 7,000 Hz
Power: AC or rechargeable battery. Low battery indicator appears when battery level is low, and
gauge powers off automatically when power reaches critical stage.
Battery life:
Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units: lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Outputs:
USB / RS-232: Fully configurable up to 115,200 baud. Includes Gauge Control Language
2 for full computer control.
Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VCD, ±0.25% of full scale at capacity,
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Configurable
settings:
Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default
settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight,
calibration
Safe overload: 150% of full scale (display shows “OVER” at 110% and above)
Weight (gauge only):
M5-012 - M5-100: 1.0 lb [0.45 kg]
M5-200 - M5-500: 1.2 lb [0.54 kg]
M5-1000: 1.2 lb [0.82 kg]
Included accessories:
Carrying case, chisel, cone, V-groove, hook, flat, extension rod, thread adapter (M5-1000
only), AC adapter, battery, USB cable, resource CD (USB driver, MESUR Lite software,
MESURgauge DEMO software, and user’s guide), NIST-traceable certificate of calibration
with data
Warranty: 3 years (see individual statement for further details)