BUCHI Rotavapo R-220 SE - Manual (Page 54)

5 Putting into operation
54 R-220 SE Operation Manual, Version F
Place the first receiving flask on the support ring .
➥ Keep the receiving flask upright with one hand.
➡ Adjust the support ring until the ball joint between the receiving flask and the
branching piece is seated without tension.
Fixate the support ring in this position. Shift the anti-slip o-ring to bring it into contact
with the retaining bracket.
➡ Fixate the joint towards the ‘branching piece 2’ with an EasyClamp (DN 25).
Connect ‘branching piece 1’ (T shaped) with ‘branching piece 2’.
➥ Adjust the joint with a small downwards gradient towards the connector of the
second receiving flask.
➡ Fixate the joint with an EasyClamp (DN 25).
Place the second receiving flask on the support ring .
➥ Keep the receiving flask upright with one hand.
➡ Adjust the support ring until the ball joint between the receiving flask and the
branching piece is seated without tension.
Fixate the support ring in this position and position the anti-slip o-ring in contact with
the retaining bracket.
➡ Fixate the joint towards the ‘branching piece 2’ with an EasyClamp (DN 25).